Smart Three phase Electricity Meter Wi Fi Enabled Energy Monitor (80A)
It's high Amp item, and the device needs certified and professional electrician for wiring. The frequency of the wireless router is 2.4GHz. The meter requires the measured device must have neutral wire. Otherwise it can't measure the device's voltage, current, and power. When you install the CT, please note the CT's direction, make sure all 3 CT with the same direction.
Please make sure the main power is off when you make the connection. Single/3 - phase electricity compatible. Three current transformers for Single phase application. Measures real-time Voltage, Current, PowerFactor, ActivePower and.
Display the temperature of the device on the App. Suitable for both residential and commercial application. The power clamp must be installed and serviced only by a qualified. Do not touch the terminals of the device during testing.
Turn off all the power supply for this equipment before installing. Always use a properly rated voltage sensing device to confirm power is off. Replace all devices, doors and covers before applying power to the. Failure to follow these instructions will result in death or serious injury.
Output Power: Up to +20dBm. 86(L) x 86(W) x 37(H) mm. 1 x 3-phase energy KWH counter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data.Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the.
If you have any questions.