Please note a terminal block was fitted which is marked'SEW' - this was just used as it had the best fit. 7.5kW (10HP) 2800RPM (2-Pole). Running current was approx 5Amps (No load - Start up would be around 13Amps).
We have tested the motor/measured so we can identify. The motor is stamped underneath the terminal block as frame D132S.
A'SEW' terminal block was fitted as it was the best fit but the motor is actually produced by Brook. The motor was fitted with new bearings and is fully tested and working condition. Windings were electrically satisfactory and have been cleaned, re varnished/stoved - did not require a rewind - all tested fine.
As it was previously a used motor it will show general cosmetic wear (paint wear/odd minor dents). Few dents to the fan cowl however the motor runs freely - purely cosmetic. The item "Brook 7.5kW (10HP) AC Electric Motor 2800RPM 2-Pole 3-Phase D132S Frame 38MM" is in sale since Wednesday, November 18, 2020. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\General Purpose Motors".
The seller is "currentelectricalservices" and is located in Birmingham. This item can be shipped to United Kingdom.